Clock D208/330/6/D/R

Clock D208/330/6/D/R

Double-sided indoor/outdoor digital clock with HH:MM:SS time display format and 330mm digit height. Lightweight construction with aluminum frame and simple installation. Designed for offices, schools, sports fields, swimming pools, production halls, stations, squares.

SYNCHRONIZATION
SENSOR INPUT 1
ADDITIONAL SYNCHRONIZATION
Color
SENSOR INPUT 2
OPTIONAL EQUIPMENT
For request
Price on request
Product number 12120000
Do you need help? We are online. Write a message on facebook
DESCRIPTION:
  • Double-sided outdoor clock with HH:MM:SS time display format and 330 mm digit height.
  • High brightness LED, long lifetime, good readable on sunshine
  • Lightweight construction with aluminum frame. Size: 1900 x 500 x 100mm
  • Two or four separetly clock fixed together for double-sided or four-sided
  • Infrared remote control D200 (needs to be ordered separately).
  • External power supply 12VDC, allows use car battery.
  • Various sychronization (GPS receiver, wireless DHF, slave impulse link, NTP server, RS485)
  • Automatic alternation displayed information
  • Contact temperature probe or infrared thermometer (needs to be order).
  • Humidity probe (needs to be order).
  • Stopwatch and countdown timer in M:SS or H:MM format controled by remote control, option to display time split.
  • Reverse timer ("New Years Eve" mode) - time until midnight is displayed
  • 9 levels of display brightness setup or auto control.
  • Designed for outdoor use in on the facades of buildings of general offices, shops, companies, production halls, train and bus stations, sports fields, swimming pools, etc.
IMPORTANT: 
  • Remote control D200 is necessary to install the clock. After installation remote control is needed only occasionally, e.g. for setup of clock without synchronization. Therefore one remote control is sufficient for organization with severel of these clocks. Remote control is not included in clock accessories and needs to be ordered separately (D200) in needed quantity. 

MINIMAL CONFIGURATION
  • LED display 6x330mm - red
  • Independent clock without synchronization

CONFIGURABLE OPTIONS - D208P/330/6/D

The configurator allows you to modify the minimum equipment according to customer requirements. This chapter describes all possibilities.

COLOUR:

  • RED – Red colour LED display. Standard option.
  • GREEN – Green colour LED display.
  • YELLOW – Yellow colour LED display.
  • BLUE – Blue colour LED display.
  • WHITE – white colour LED display.
  • ATYP – Colour of LED display for request.

SYNCHRONIZATION:
  • NONE - no synchronization, independent.
  • PL INPUT - impulse slave line input (minute or second, bipolar impulse 12-60VDC). After connection slave clock to line, coded time distribution automatically set time and date from the master clock SONTEK.
  • GPS RECEIVER INPUT - external connector for GPS receiver. In this case, GPS receiver need to be mounted in ideal signal location. GPS receiver nees to be ordered separately (e.g. D910SQ or D610PQ). Possible use extention cord PS2, 5 or 10 meters .
  • BUILT-IN GPS RECEIVER -  GPS receiver is inside the clock. The clock must be mounted in the place with ideal signal condition.

SENSOR 1:

  • NONE - without measurement.
  • TEMPERATURE PROBE T1 INPUT - there is block terminal for connection temperature probe (D111SQ, D211SQ) on rear side clock (needs to be ordered separately)

SENSOR 2:

  • NONE - without measurement.
  • TEMPERATURE PROBE T2 INPUT - there is block terminal for connection temperature probe (D111SQ, D211SQ) on rear side clock (needs to be ordered separately).
  • BUILT-IN INFRARED THERMOMETER - built-in temperature measurement in 18° angle. The sensor is embedded directly in the clock but allows the change direction. The most common use is for measuring the water temperature in the pool.
  • HUMIDITY PROBE INPUT - alows to connected humidity sensor D411SQ (needs to be ordered separately).

ADDITIONAL SYNCHRONIZATION:

  • NONE - no aditional synchronization
  • BUILT-IN DHF - Wireless DHF data distribution. The communication is set to transmitt  time protocol (MASTER function), if main sychronization is used (for instance GPS receiver is connected). Communication is set to receive (SLAVE), if main sychronization not used. Several „SLAVE“ clocks are synchronized by one "MASTER" clock. Communication protocol allows time, and also temperature distribution.
  • 485 – Serial data link 485 allows time distribution between several clocks by two wires. The communication is set to transmitt  time protocol (MASTER function), if main sychronization is used (for instance GPS receiver is connected). Communication is set to receive (SLAVE), if main sychronization not used. Several „SLAVE“ clocks are synchronized by one "MASTER" clock. Communication protocol allows time, and also temperature distribution.
  • NTP+DHF OUT – connector RJ45 for the Ethernet network connection. After connection is possible to set two IP addresses of NTP servers. Clocks will be synchronized by NTP server. You can choose own NTP server or NTP server on the network. Time information retrieve from NTP server is wireless transmitted  to others clocks in time distribution network via DHF.
  • NTP+485 OUT – onnector RJ45 for the Ethernet network connection. After connection is possible to set two IP addresses of NTP servers. Clocks will be synchronized by NTP server. You can choose own NTP server or NTP server on the network. Time information retrieve from NTP server is transmitted   to others clocks in time distribution network via RS485 serial link. 

 POWER:

  • 12VDC – safe voltage power supply 12VDC. Cable with XLR type connector
  • PoE - power over ethernet, only if additional synchronization is NTP 
TECHNICAL PARAMETERS: