Clock D208P/250/6/D/R

Clock D208P/250/6/D/R

Double-sided digital clock in HH: MM: SS format with digit height 250mm, also suitable for exterior. Lightweight construction with aluminum frame and easy assembly. Designed for offices, schools, sports facilities, production halls, stations, squares .. Slovak Product!

SYNCHRONIZATION
Color
ADDITIONAL SYNCHRONIZATION
SENSOR INPUT 1
SENSOR INPUT 2
OPTIONAL EQUIPMENT
For request
Price on request
Product number 12080000
Request for price offer simply with green button "Request price". It works similar to cart, but It will create price request instead of order.
DESCRIPTION:
  • Double-sided outdoor clock with HH:MM:SS time display format and 250 mm digit height.
  • High brightness LED, long lifetime, good readable on sunshine
  • Lightweight construction with aluminum frame. Size: 1800 x 400 x 100mm
  • Two or four separetly clock fixed together for double-sided or four-sided
  • Infrared remote control D200 (needs to be ordered separately).
  • External power supply 12VDC, allows use car battery.
  • Various sychronization (GPS receiver, wireless DHF, slave impulse link, NTP server, RS485)
  • Automatic alternation displayed information
  • Contact temperature probe or infrared thermometer (needs to be order).
  • Humidity probe (needs to be order).
  • Stopwatch and countdown timer in M:SS or H:MM format controled by remote control, option to display time split.
  • Reverse timer ("New Years Eve" mode) - time until midnight is displayed
  • 9 levels of display brightness setup or auto control.
  • Designed for outdoor use in on the facades of buildings of general offices, shops, companies, production halls, train and bus stations, sports fields, swimming pools, etc.
IMPORTANT: 
  • Remote control D200 is necessary to install the clock. After installation remote control is needed only occasionally, e.g. for setup of clock without synchronization. Therefore one remote control is sufficient for organization with severel of these clocks. Remote control is not included in clock accessories and needs to be ordered separately (D200) in needed quantity. 

MINIMAL CONFIGURATION
  • LED display 6x250mm - red
  • Independent clock without synchronization

CONFIGURABLE OPTIONS - D208P/250/6/D

The configurator allows you to modify the minimum equipment according to customer requirements. This chapter describes all possibilities.

COLOUR:

  • RED – Red colour LED display. Standard option.
  • GREEN – Green colour LED display.
  • YELLOW – Yellow colour LED display.
  • BLUE – Blue colour LED display.
  • WHITE – white colour LED display.
  • ATYP – Colour of LED display for request.

SYNCHRONIZATION:
  • NONE - no synchronization, independent.
  • PL INPUT - impulse slave line input (minute or second, bipolar impulse 12-60VDC). After connection slave clock to line, coded time distribution automatically set time and date from the master clock SONTEK.
  • GPS RECEIVER INPUT - external connector for GPS receiver. In this case, GPS receiver need to be mounted in ideal signal location. GPS receiver nees to be ordered separately (e.g. D910SQ or D610PQ). Possible use extention cord PS2, 5 or 10 meters .
  • BUILT-IN GPS RECEIVER -  GPS receiver is inside the clock. The clock must be mounted in the place with ideal signal condition.

SENSOR 1:

  • NONE - without measurement.
  • TEMPERATURE PROBE T1 INPUT - there is block terminal for connection temperature probe (D111SQ, D211SQ) on rear side clock (needs to be ordered separately)

SENSOR 2:

  • NONE - without measurement.
  • TEMPERATURE PROBE T2 INPUT - there is block terminal for connection temperature probe (D111SQ, D211SQ) on rear side clock (needs to be ordered separately).
  • BUILT-IN INFRARED THERMOMETER - built-in temperature measurement in 18° angle. The sensor is embedded directly in the clock but allows the change direction. The most common use is for measuring the water temperature in the pool.
  • HUMIDITY PROBE INPUT - alows to connected humidity sensor D411SQ (needs to be ordered separately).
ADDITIONAL SYNCHRONIZATION:

     NONE - Clock does not have additional synchronization

    485 - Serial data transmission between devices over a two-wire line. If a master synchronization is used, e.g. GPS, the 485 is set to transmit (MASTER) the time protocol. If master synchronization is not used, 485 is in ready mode (SLAVE) ready for reception. A device in “MASTER” mode can be connected to several devices in “SLAVE” mode. They then have time synchronized according to "MASTRA". The protocol also allows to transmit temperature data.

    DHF BUILT - Serial wireless data transmission. If master synchronization is used, the direction is set to broadcast (MASTER) the time protocol. If no main synchronization is used, the clock in the input mode (SLAVE) is ready for reception. A device in “MASTER” mode can be connected to several devices in “SLAVE” mode. They then have time synchronized according to "MASTRA". The protocol also allows to transmit temperature data.

    NTP - connector for synchronization from NTP server in ethernet network. Once connected to the network, the addresses of two servers can be set via the web interface. The clock will then sync from the listed servers. NTP server you can have your own or use some of the servers on the Internet.

 

OPTIONAL EQUIPMENT:

    SIREN WITHOUT SIREN - The clock does not have piezo-sulfur.

    WITH SIREN - Part of the clock is a siren with a constant tone. The clock can be programmed to sound the siren at nine programmed times. Used to report breaks.
TECHNICAL PARAMETERS: